Available for immediate shipment!
STOCK UNIT EQUIPPED OPTIONS:
- Auxiliary Function Option PTRX-VMC
- Converter - Parasolid File - Mill – RMX
- Electronic Handwheel Option
- TRAK Remote Stop/Go Switch
- Retention Knobs - CAT 40 Tooling - Set of 16
- Vise, 6”, Kurt DX6, Includes Mounting Hardware
TMC10 Specifications:
- Table Size: 44.09″ x 19.69″
- Travel (x, y, z): 40.75″ x 20″ x 20″
- Footprint: 111″ x 135″
- Horsepower: 15/10
The Versatile Machine That Works Two Ways:
Toolroom Ops™ - when you need the TMC to work like a TRAK bed mill, but with chips and coolant contained
- Optional Electronic Handwheels (x, y, and z)
- Selectable 2 or 3 axis CNC
- Full DRO for manual operations
Production Ops - when you need to run small to medium production quantities
- 16-tool carousel tool changer along with manual tool change for additional tools
- Convenient Tool Table fly out window
- Fully enclosed ANSI compliant operation
TMC10 Detailed Specifications
| Table size | 44.09″ x 19.69″ |
| Travel (X, Y, Z axis) with soft limits | 40.75″ x 20″ x 20″ |
| Rapid traverse X, Y, Z | 400 IPM in Toolroom Ops 1,000 IPM in Production Ops |
| T-slots (number x width x pitch) | 5 x .709″ x 3.937″ |
| Spindle taper | 40 Taper |
| Spindle speed range | 50 - 8,000 RPM 50 - 12,000 RPM (optional) |
| Spindle nose diameter | 3″ |
| Tool clamping force (90 psi) | 1,500 lbs |
| Tool holder type | CAT 40 or BT 40 |
| ATC tool capacity | 16 |
| Maximum tool weight (incl. holder) | 15 lbs |
| Maximum tool diameter | 3.14″ |
| Carousel speed | .8 sec from station to station |
| Tool selection system | Bi-directional/shortest path |
| Spindle motor HP - peak | 15 HP |
| Spindle motor HP - continuous | 10 HP |
| Power requirements Standard (208V) 8K Spindle |
208V (200-240V is acceptable), 3P, 68A (Current can be as high as 87 amps with all options ordered - CTS (+14A), 4th axis (+5A)) |
| Power requirements Standard (208V) 12K Spindle |
208V (200-240V is acceptable), 3P, 69A (Current can be as high as 88 amps with all options ordered - CTS (+14A), 4th axis (+5A); includes cooler current) |
| Power requirements Optional (480V) 8K Spindle |
480V with transformer option (432-528V is acceptable), 3P, 46A 46 amps based nominal rated current of transformer |
| Power requirements Optional (480V) 12K Spindle |
480V with transformer option (432-528V is acceptable), 3P, 46A 46 amps based nominal rated current of transformer |
| Maximum weight of workpiece | 1,000 lbs |
| Height of table from bottom of bed*** | 38″ |
| Min. spindle nose to table distance **** | 3.5″ |
| Max. spindle nose to table distance **** | 23.50″ |
| Distance of tool carousel to table | 17.50″ |
| Spindle center to spindle head casting face | 18.25″ |
| Min. machine height *** | 90″ |
| Max. machine height (head all the way up) *** | 106.5″ |
| Overall width of machine with side doors open, auger chute and chip container in place | 174.50″ |
| Overall length of machine with electrical cabinet fully open 180° | 152″ |
| Footprint of machine with coolant tank & auger in place and pendant rotated 90° (width x length) | 111″ x 135″ |
| Weight net / shipping (lbs) | 9,900 / 10,250 |
| Coolant capacity | 56 gal |
| Coolant pump and wash power | 750 Watt |
| Air - CFM (at 90 psi), SCFM | 2.5 CFM, 18 SCFM |
| Air quality | Air dried/water separator upstream of TMC |
| Lubrication pump capacity | 2 liter |
Specifications subject to change.*** Height changes slightly based on how machine is leveled on leveling screws.**** Can vary slightly due to home switch location and soft limit settings.